Code Alarm Catx4 Owners Manual
Browse and Read Code Alarm Catx 4 Manual. One of them is this book code alarm catx 4 manual. It is so usual with the printed books. However, many people sometimes have no space to bring the book for them; this is why they can't read the book wherever they want.
Programming the Code Alarm CATX4 Transmitter Required Battery: • CR2032 Compatible With: •, •, •, • •, • •, •, To program transmitters: Note: This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded, the security system will start deleting transmitters from memory in chronological order. • Turn the ignition ON. • Press and hold the valet/override button. • Within 10 seconds the system will chirp/flash the parking lights (3) three times, release the button. • Press Button 1 of each transmitter you wish to program. The system will respond with 1 chirp for each accepted transmitter (up to 4).
• Turn the Ignition OFF to exit programming. The system will also exit programming after 15 seconds of inactivity. Note: This system has 1 button programming which programs all channels of the system. NOTE: This transmitter works with multiple Alarm and Keyless Entry systems please make sure you use the ACTUAL model number of your alarm system in the ASK A QUESTION page unless you question is related to the transmitter itself. HINT: Click the ANSWERS tab at the top of the page and search using CATX4, you will see a list of all the Alarms and Keyless Entry Systems that use this transmitter.
Programming the Code Alarm CATX4 Transmitter Required Battery: • CR2032 Compatible With: •, •, •, • •, • •, •, To program transmitters: Note: This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded, the security system will start deleting transmitters from memory in chronological order. • Turn the ignition ON. • Press and hold the valet/override button.
• Within 10 seconds the system will chirp/flash the parking lights (3) three times, release the button. • Press Button 1 of each transmitter you wish to program. The system will respond with 1 chirp for each accepted transmitter (up to 4). • Turn the Ignition OFF to exit programming.
The system will also exit programming after 15 seconds of inactivity. Note: This system has 1 button programming which programs all channels of the system. NOTE: This transmitter works with multiple Alarm and Keyless Entry systems please make sure you use the ACTUAL model number of your alarm system in the ASK A QUESTION page unless you question is related to the transmitter itself. HINT: Click the ANSWERS tab at the top of the page and search using CATX4, you will see a list of all the Alarms and Keyless Entry Systems that use this transmitter.
- среда 03 октября
- 91